Gigabyte Z890 EAGLE WIFI7 LGA1851 DDR5 ATX Motherboard
At the top of this batch, the Z890 EAGLE WIFI7 combines the Intel Z890 Express chipset, the LGA1851 socket and DDR5 memory with Wi-Fi 7, four M.2 connectors and a USB4 Type-C port, aimed at a high-end Intel Core Ultra gaming or creator build.
Key Specifications
- Intel Z890 Express chipset with LGA1851 socket support for Intel Core Ultra processors
- 4 x DDR5 DIMM sockets supporting up to 256 GB of dual-channel memory, with DDR5 speeds up to 9200 MT/s overclocked, XMP memory module support and CUDIMM memory module support
- 1 x PCI Express x16 slot supporting PCIe 5.0 and running at x16, plus 2 x PCI Express x16 slots supporting PCIe 4.0 and running at x4
- 4 x M.2 connectors: one PCIe 5.0 x4/x2 connector and one PCIe 4.0 x4/x2 connector from the CPU, and two PCIe 4.0 x4/x2 connectors from the chipset, one of which also supports SATA SSDs, plus 4 x SATA 6Gb/s connectors with RAID 0, RAID 1, RAID 5 and RAID 10 support for NVMe SSD and SATA storage devices
- Realtek 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps)
- Wi-Fi 7 module: MediaTek Wi-Fi 7 MT7925 on PCB rev. 1.0, or Realtek Wi-Fi 7 RTL8922AE on PCB rev. 1.1, with 802.11a, b, g, n, ac, ax, be on 2.4/5/6 GHz bands, Bluetooth 5.4, and 11be 160MHz wireless standard support
- Realtek audio codec with High Definition Audio and 2/4/5.1/7.1-channel output
- Display outputs: 1 x USB4 USB Type-C port supporting USB4 and DisplayPort video outputs at up to 3840x2160 at 144 Hz, and 1 x DisplayPort at up to 3840x2160 at 144 Hz, both with DisplayPort 2.1 support
- Back panel USB: 1 x USB4 USB Type-C port, 2 x USB 3.2 Gen 2 Type-A ports, 3 x USB 3.2 Gen 1 ports and 4 x USB 2.0/1.1 ports, plus 2 x antenna connectors
- ATX form factor, 30.5cm x 24.4cm
Twin 14+1+2 Phases VRM with EZ-Latch Plus
Power delivery uses a digital twin 14+1+2 phases VRM solution, while EZ-Latch Plus gives the PCIe and M.2 slots a quick-release and screwless design and EZ-Latch Click applies a screwless design to the M.2 heatsinks, making graphics card and SSD swaps simpler in a finished build.
- Choose an Intel Core Ultra processor for the LGA1851 socket.
- Install up to 256 GB of DDR5 across the four DIMM sockets with an XMP profile enabled.
- Fit a PCIe 5.0 graphics card in the x16 slot using the EZ-Latch Plus release.
- Spread storage across the four M.2 connectors and the four SATA ports, and connect wirelessly through Wi-Fi 7 or wired through 2.5GbE LAN.
