LianLi O11 DYNAMIC EVO XL Black

Full-tower chassis with two modes: Normal Mode/ Reverse Mode
Front and side tempered glass panels with a removable pilar for a seamless view of components and RGB lighting
Supports up to 3x 420mm radiators and a maximum of 11 fans
Offers mounting space for 7 storage drives
Dual-chamber layout with cable management compartment and three cable holders
Number of PSU supported : 1
Features a multi-directional power button and movable IO module
Optional accessories for vertical GPU or upright GPU mounting
Brand: LIAN LI
Availability: In Stock
Rs. 89,999

Introducing the all-new O11D EVO XL, an enlarged case that accommodates numerous components while enhancing modularity to meet the needs of most PC enthusiasts.

REVERSIBLE CHASSIS

SUPPORTS 3 × 420MM RADIATORS

ENHANCED MODULARITY

REMOVABLE FRONT PILAR

SIMPLE GPU INSTALLATION

7 DRIVES CAPACITY

MULTIPLE I/O PORTS

CABLE MANAGEMENT FRIENDLY

TWO COLOR / TWO MODES

White

Black

Derived from the O11D EVO, the O11D EVO XL can be displayed in two modes with just a few simple steps, allowing for a left or right view.

For users that would like to build in Reversed Mode :
The audio cable is not long enough under reverse mode. If your O11D EVO XL case doesn’t include the 400mm extension cable, please contact us or purchase it on AliExpress at a minimal cost. This only impacts a small group of users, and we appreciate your understanding.

The ARGB strip in the front dazzles with built in lighting effects and the ability to sync to motherboard.

FINE MESH, EQUISITE TOUCH

Keeping style and performance in mind, both the top and side panels of the O11D EVO XL are crafted from aluminum with fine mesh, providing a high-end appearance yet delivering superior cooling compared to the O11D XL.

The fully open bottom panel, along with three dust filters ensures uncompromised airflow while effectively keeping dust out of the chassis.

Bottom - Nylon Fine Dust filter Tray

Top and Side – Magnetic Dust Filter

COMPLETE SEEMLESS VIEW

The O11D EVO XL’s front pillar can now be easily removed, providing an unobstructed view for showcasing hardware without affecting the case’s structure.

Note: Please keep the front pillar fixed in place while transporting the case.

BIG SIZE, GREAT COMPATIBILITY

Plenty of space is available in the O11D EVO XL for accommodating modern, powerful, and large components. There’s also sufficient cooling with the support for 3 × 420mm radiators.

Larger than the O11D EVO.

All 3 sides can hold up to a maximum of 420mm radiator.

For users that would like to install a 130mm radiator at the bottom:
A small number of users may encounter difficulty in installing a 130mm radiator on the bottom fan bracket. If you face this issue, please contact us or purchase the necessary components on AliExpress at a minimal cost. We appreciate your understanding.

FLEXIBLE CONFIGURATION

The adjustable motherboard tray can move up and down with three levels of height to fit different fan and radiator combination.
The motherboard tray supports a maximum of E-ATX (width 280mm) motherboard.

There are three positions for the motherboard tray:

STRUGGLE-FREE FAN BRACKETS

Equipped with quick-release design,
the fan brackets can be easily removed or installed.

Top Fan Bracket
Removable from the top

Bottom Fan Bracket
Removable from the main chamber

The side bracket can be oriented in two ways depending on how you set up the fan intake/exhaust or position.

Side Fan Bracket
Removable with a quick-latch

Comes with 2 seal plates to ensure no air pressure leak is created when mounting a 360mm radiator or 3 × 120mm fan on the side. The plates can be adjusted and moved around based on the configuration.

Inner Scenario
Supports up to 81mm thick radiator/ fan combo in the main chamber
(40mm in the second chamber)

Fans mount toward the front side

Fans mount toward the back side

Outer Scenario
Supports up to 117.2 mm thick radiator/ fan combo in the main chamber

Fans mount toward the front side

Fans mount toward the back side

RELOCATABLE I/O PORT

To satisfy any need, the modular I/O port includes 1 × USB Type C and 4 × USB Type A ports.

At the bottom of the chassis, the I/O module can be relocated to 3 different locations without the use of any tools.

FRIENDLY STORAGE CAPACITY

Offers multiple easily accessible storage mounting locations that support up to 7 × SSDs or 4 × HDDs + 3 × SSDs.

CABLE MANAGEMENT BAR
2.5” SSD × 3
The removable cable management bar helps tidy up your system and give it a better aesthetic.

DRIVE CAGE
2.5” SSD× 4 or 3.5” HDD × 4
Two swinging hot-swappable cages that can mount a 15mm thick 120mm fan on the side to cool the drives.

WITH WATER COOLING IN MIND

Offers a hidden mounting point for D5 or DDC pump, accessible by removing the bottom drive cage in both reverse and normal modes .

CUSTOMIZABLE CABLE MANAGEMENT

The O11D EVO XL comes with 3 dual-layer cable clips that can be mounted anywhere along vertical grommets pass through, providing versatility for your cable routing plan.

Bulky cables can be securely held in the cable holder.

Thinner cables can be managed using Velcro straps.

OPTIONAL ASSESSORY

UPRIGHT GPU

The upright GPU bracket allows you to install the GPU outside of the case and then conveniently put back it. The GPU can be flipped with the side bracket, letting you decide to have the GPU ports at the top or bottom.

Available separately, the PCIe riser cable is 900mm long with enough length for cable management and routing.

VERTICAL GPU

Not compatible with VG4-4X /VG4-4W.

LIAN LI’s O11D EVO XL, compatible with its universal vertical GPU kit, offers a professional and attractive build aesthetic through vertical GPU mounting.
Note: Not applicable with Reverse Mode

Lower Position / Lowest Slot Installation

Upper Position / Highest Slot Installation

COMPATIBLE WITH EDGE SERIES PSU

No Specifications Found